Herramientas de usuario
Herramientas del sitio
vax:decnet
Red DECnet
Para instalar la red es necesario disponer el software del producto decnet_phase_iv_vax073, que está incluido en el disco del sistema operativo y una PAK adecuada, DVNETRTG.
A esta máquina llamada VAX se le asigna la dirección 56.1, que corresponde a la mac AA-00-04-00-01-E0 y al SYSTEMID 57345. Es necesario modificar la mac en VirtualBOX (que debe de hacerse con la máquina virtual anfitriona linux apagada.
Se arranca la máquina:
root@VAX:~/VMS73 # vax VAX simulator V3.11-0 NVR: buffering file in memory RQ: unit is read only libpcap version 1.3.0 Eth: opened OS device eth0 KA655-B V5.3, VMB 2.7 Performing normal system tests. 40..39..38..37..36..35..34..33..32..31..30..29..28..27..26..25.. 24..23..22..21..20..19..18..17..16..15..14..13..12..11..10..09.. 08..07..06..05..04..03.. Tests completed. >>>boot (BOOT/R5:0 DUA0 2.. -DUA0 1..0.. %SYSBOOT-I-SYSBOOT Mapping the SYSDUMP.DMP on the System Disk %SYSBOOT-I-SYSBOOT SYSDUMP.DMP on System Disk successfully mapped %SYSBOOT-I-SYSBOOT Mapping PAGEFILE.SYS on the System Disk %SYSBOOT-I-SYSBOOT SAVEDUMP parameter not set to protect the PAGEFILE.SYS OpenVMS (TM) VAX Version V7.3 Major version id = 1 Minor version id = 0 %WBM-I-WBMINFO Write Bitmap has successfully completed initialization. $! Copyright 2001 Compaq Computer Corporation. %STDRV-I-STARTUP, OpenVMS startup begun at dd-mmm-yyyy hh:mm:ss.cc %RUN-S-PROC_ID, identification of created process is 00000206 %DCL-S-SPAWNED, process SYSTEM_1 spawned %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Operator _VAX$OPA0: has been enabled, username SYSTEM %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Operator status for operator _VAX$OPA0: CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY, LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10, OPER11, OPER12 %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Logfile has been initialized by operator _VAX$OPA0: Logfile is VAX::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;4 %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Operator status for operator VAX::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;4 CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY, LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10, OPER11, OPER12 %SET-I-NEWAUDSRV, identification of new audit server process is 0000020C %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Message from user JOB_CONTROL on VAX %JBC-E-OPENERR, error opening SYS$COMMON:[SYSEXE]QMAN$MASTER.DAT; %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Message from user JOB_CONTROL on VAX -RMS-E-FNF, file not found %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Message from user SYSTEM on VAX %SECSRV-E-NOPROXYDB, cannot find proxy database file NET$PROXY.DAT %RMS-E-FNF, file not found %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Message from user SYSTEM on VAX %SECSRV-E-NOPROXYDB, cannot find proxy database file NET$PROXY.DAT %RMS-E-FNF, file not found %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Message from user SYSTEM on VAX %SECSRV-I-CIACRECLUDB, security server created cluster intrusion database %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Message from user SYSTEM on VAX %SECSRV-I-SERVERSTARTINGU, security server starting up %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Message from user SYSTEM on VAX %SECSRV-I-CIASTARTINGUP, breakin detection and evasion processing now starting up %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Message from user SYSTEM on VAX Warning: DECdtm log file not found (SYS$JOURNAL:SYSTEM$VAX.LM$JOURNAL) %RMS-E-FNF, file not found TP server process waiting %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Message from user AUDIT$SERVER on VAX Security alarm (SECURITY) and security audit (SECURITY) on VAX, system id: 1025 Auditable event: Audit server starting up Event time: dd-mmm-yyyy hh:mm:ss.cc PID: 00000203 Username: SYSTEM %STARTUP-I-AUDITCONTINUE, audit server initialization complete The OpenVMS VAX system is now executing the site-specific startup commands. %MOUNT-I-MOUNTED, DATA1 mounted on _VAX$DUA1: %SET-I-INTSET, login interactive limit = 64, current interactive value = 0 SYSTEM job terminated at dd-mmm-yyyy hh:mm:ss.cc Accounting information: Buffered I/O count: 1137 Peak working set size: 1577 Direct I/O count: 519 Peak page file size: 4924 Page faults: 3583 Mounted volumes: 1 Charged CPU time: 0 00:00:09.75 Elapsed time: 0 00:00:12.99(Pulsar ENTER) Welcome to OpenVMS (TM) VAX Operating System, Version V7.3 Username: system Password: (Teclear la clave correspondiente) Welcome to OpenVMS (TM) VAX Operating System, Version V7.3 Last interactive login on ???????, dd-mmm-yyyy hh:mm $ set term/vt100 $ _
Si no está ya, se “introduce” la imagen de disco en el “lector virtual”.
$ (Pulsar Ctrl+E) Simulation stopped, PC: 834B4F43 (CMPL R4,R5) sim> attach -r rq3 openvms-vax-073-os.iso RQ: unit is read only sim> cont _
luego se monta el CD y se continúa
mount/over=id dua3: %MOUNT-I-WRITELOCK, volume is write locked %MOUNT-I-MOUNTED, VAXVMS073 mounted on _VAX$DUA3: $ set def dua3:[decnet_phase_iv_vax073.kit] $ LICENSE REGISTER DVNETRTG /ISSUER=DEC /AUTHORIZATION=HOBBYIST-XX-KEY99999-999999 /PRO DUCER=DEC /UNITS=0 /ACTIVITY=CONSTANT=100 /TERMINATION_DATE=dd-mmm-yyyy /CHECKSUM =9-XXXX-XXXX-XXXX-XXXX $ LICENSE LOAD DVNETRTG %LICENSE-I-LOADED, DEC DVNETRTG was successfully loaded with 0 units $ product install * The following product has been selected: DEC VAXVMS DECNET_PHASE_IV V7.3 Layered Product Do you want to continue? [YES] (Pulsar ENTER) Configuration phase starting ... You will be asked to choose options, if any, for each selected product and for any products that may be installed to satisfy software dependency requirements. DEC VAXVMS DECNET_PHASE_IV V7.3: DECNET_PHASE_IV COPYRIGHT (c) 2-APR-2001 -- All rights reserved Digital Equipment Corporation * This product does not have any configuration options. Support addendum to DECnet Phase IV service contract required Do you want to continue? [YES] (Pulsar ENTER) Execution phase starting ... The following product will be installed to destination: DEC VAXVMS DECNET_PHASE_IV V7.3 DISK$VAX:[VMS$COMMON.] Portion done: 0%...10%...30%...40%...50%...60%...70%...80%...100% The following product has been installed: DEC VAXVMS DECNET_PHASE_IV V7.3 Layered Product $ @sys$manager:netconfig DECnet for OpenVMS network configuration procedure This procedure will help you define the parameters needed to get DECnet running on this machine. You will be shown the changes before they are executed, in case you wish to perform them manually. What do you want your DECnet node name to be? [VAX]: (Pulsar ENTER) What do you want your DECnet address to be? : 56.1 Do you want to operate as a router? [NO (nonrouting)]: (Pulsar ENTER) Do you want a default DECnet account? [NO]: (Pulsar ENTER) Do you want a default account for the MAIL object? [YES]: (Pulsar ENTER) Do you want a default account for the FAL object? [NO]: (Pulsar ENTER) Do you want a default account for the PHONE object? [YES]: (Pulsar ENTER) Do you want a default account for the NML object? [YES]: (Pulsar ENTER) Do you want a default account for the MIRROR object? [YES]: (Pulsar ENTER) Do you want a default account for the VPM object? [YES]: (Pulsar ENTER) Here are the commands necessary to setup your system.
Se borra la pantalla.
$ RUN SYS$SYSTEM:NCP
PURGE MODULE CONFIGURATOR KNOWN CIRCUITS ALL
$ DEFINE/USER SYS$OUTPUT NL:
$ DEFINE/USER SYS$ERROR NL:
$ RUN SYS$SYSTEM:NCP ! Remove existing entry, if any
PURGE NODE 56.1 ALL
PURGE NODE VAX ALL
$ RUN SYS$SYSTEM:NCP
DEFINE EXECUTOR ADDRESS 56.1
DEFINE EXECUTOR STATE ON
DEFINE EXECUTOR NAME VAX
DEFINE EXECUTOR MAXIMUM ADDRESS 1023
DEFINE EXECUTOR TYPE NONROUTING IV
PURGE KNOWN OBJECTS ALL
DEFINE OBJECT TASK NUMBER 0 USER ILLEGAL PASSWORD DISABLED
DEFINE OBJECT MAIL NUMBER 27 USER MAIL$SERVER PASSWORD eyopawyma
$ DEFINE/USER_MODE SYSUAF SYS$SYSTEM:SYSUAF.DAT
$ RUN SYS$SYSTEM:AUTHORIZE
ADD MAIL$SERVER /OWNER="MAIL$SERVER DEFAULT" -
/PASSWORD=eyopawyma -
/UIC=[376,374] /ACCOUNT=DECNET -
/DEVICE=SYS$SPECIFIC: /DIRECTORY=[MAIL$SERVER] -
/PRIVILEGE=(TMPMBX,NETMBX) -
Press RETURN to continue (Pulsar ENTER)
/PRIVILEGE=(TMPMBX,NETMBX) -
/DEFPRIVILEGE=(TMPMBX,NETMBX) -
/FLAGS=(NOCAPTIVE,RESTRICTED,NODISUSER) /LGICMD=NL: -
/NOBATCH /NOINTERACTIVE
MODIFY MAIL$SERVER /PASSWORD=eyopawyma
$ CREATE/DIRECTORY SYS$SPECIFIC:[MAIL$SERVER] /OWNER=[376,374]
$ RUN SYS$SYSTEM:NCP
DEFINE OBJECT PHONE NUMBER 29 USER PHONE$SERVER PASSWORD awiawbcaf
$ DEFINE/USER_MODE SYSUAF SYS$SYSTEM:SYSUAF.DAT
$ RUN SYS$SYSTEM:AUTHORIZE
ADD PHONE$SERVER /OWNER="PHONE$SERVER DEFAULT" -
/PASSWORD=awiawbcaf -
/UIC=[376,372] /ACCOUNT=DECNET -
/DEVICE=SYS$SPECIFIC: /DIRECTORY=[PHONE$SERVER] -
/PRIVILEGE=(TMPMBX,NETMBX) -
/DEFPRIVILEGE=(TMPMBX,NETMBX) -
/FLAGS=(NOCAPTIVE,RESTRICTED,NODISUSER) /LGICMD=NL: -
/NOBATCH /NOINTERACTIVE
MODIFY PHONE$SERVER /PASSWORD=awiawbcaf
$ CREATE/DIRECTORY SYS$SPECIFIC:[PHONE$SERVER] /OWNER=[376,372]
$ RUN SYS$SYSTEM:NCP
DEFINE OBJECT NML NUMBER 19 USER NML$SERVER PASSWORD tybativi
$ DEFINE/USER_MODE SYSUAF SYS$SYSTEM:SYSUAF.DAT
Press RETURN to continue (Pulsar ENTER)
$ DEFINE/USER_MODE SYSUAF SYS$SYSTEM:SYSUAF.DAT
$ RUN SYS$SYSTEM:AUTHORIZE
ADD NML$SERVER /OWNER="NML$SERVER DEFAULT" -
/PASSWORD=tybativi -
/UIC=[376,371] /ACCOUNT=DECNET -
/DEVICE=SYS$SPECIFIC: /DIRECTORY=[NML$SERVER] -
/PRIVILEGE=(TMPMBX,NETMBX) -
/DEFPRIVILEGE=(TMPMBX,NETMBX) -
/FLAGS=(NOCAPTIVE,RESTRICTED,NODISUSER) /LGICMD=NL: -
/NOBATCH /NOINTERACTIVE
MODIFY NML$SERVER /PASSWORD=tybativi
$ CREATE/DIRECTORY SYS$SPECIFIC:[NML$SERVER] /OWNER=[376,371]
$ RUN SYS$SYSTEM:NCP
DEFINE OBJECT MIRROR NUMBER 25 USER MIRRO$SERVER PASSWORD cegmikop
$ DEFINE/USER_MODE SYSUAF SYS$SYSTEM:SYSUAF.DAT
$ RUN SYS$SYSTEM:AUTHORIZE
ADD MIRRO$SERVER /OWNER="MIRRO$SERVER DEFAULT" -
/PASSWORD=cegmikop -
/UIC=[376,367] /ACCOUNT=DECNET -
/DEVICE=SYS$SPECIFIC: /DIRECTORY=[MIRRO$SERVER] -
/PRIVILEGE=(TMPMBX,NETMBX) -
/DEFPRIVILEGE=(TMPMBX,NETMBX) -
/FLAGS=(NOCAPTIVE,RESTRICTED,NODISUSER) /LGICMD=NL: -
Press RETURN to continue (Pulsar ENTER)
/FLAGS=(NOCAPTIVE,RESTRICTED,NODISUSER) /LGICMD=NL: -
/NOBATCH /NOINTERACTIVE
MODIFY MIRRO$SERVER /PASSWORD=cegmikop
$ CREATE/DIRECTORY SYS$SPECIFIC:[MIRRO$SERVER] /OWNER=[376,367]
$ RUN SYS$SYSTEM:NCP
DEFINE OBJECT VPM NUMBER 51 USER VPM$SERVER PASSWORD alupanyeax
$ DEFINE/USER_MODE SYSUAF SYS$SYSTEM:SYSUAF.DAT
$ RUN SYS$SYSTEM:AUTHORIZE
ADD VPM$SERVER /OWNER="VPM$SERVER DEFAULT" -
/PASSWORD=alupanyeax -
/UIC=[376,370] /ACCOUNT=DECNET -
/DEVICE=SYS$SPECIFIC: /DIRECTORY=[VPM$SERVER] -
/PRIVILEGE=(TMPMBX,NETMBX) -
/DEFPRIVILEGE=(TMPMBX,NETMBX) -
/FLAGS=(NOCAPTIVE,RESTRICTED,NODISUSER) /LGICMD=NL: -
/NOBATCH /NOINTERACTIVE
MODIFY VPM$SERVER /PASSWORD=alupanyeax
$ CREATE/DIRECTORY SYS$SPECIFIC:[VPM$SERVER] /OWNER=[376,370]
$ RUN SYS$SYSTEM:NCP
DEFINE LINE QNA-0 STATE ON
DEFINE CIRCUIT QNA-0 STATE ON COST 4
DEFINE LOGGING MONITOR STATE ON
DEFINE LOGGING MONITOR EVENTS 0.0-9
Press RETURN to continue (Pulsar ENTER)
DEFINE LOGGING MONITOR EVENTS 2.0-1
DEFINE LOGGING MONITOR EVENTS 4.2-13,15-16,18-20
DEFINE LOGGING MONITOR EVENTS 5.0-18
DEFINE LOGGING MONITOR EVENTS 128.0-4
Do you want these commands to be executed? [YES]: (Pulsar ENTER)
%NCP-I-NOINFO, No information in database
%NCP-I-NOINFO, No information in database
%UAF-I-ADDMSG, user record successfully added
%%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%%
Message from user AUDIT$SERVER on VAX
Security alarm (SECURITY) and security audit (SECURITY) on VAX, system id: 1025
Auditable event: System UAF record addition
Event time: dd-mmm-yyyy hh:mm:ss.cc
PID: 00000210
Process name: SYSTEM
Username: SYSTEM
Process owner: [SYSTEM]
Terminal name: OPA0:
Image name: VAX$DUA0:[SYS0.SYSCOMMON.][SYSEXE]AUTHORIZE.EXE
Object class name: FILE
Object name: SYS$COMMON:[SYSEXE]SYSUAF.DAT;1
User record: MAIL$SERVER
Account: New: DECNET
Original:
Batch access: New: Primary: (no access), Secondary: (no access)
Original: Primary: (full access), Secondary: (full acc
ess)
Default privileges: New: TMPMBX,NETMBX
Original: TMPMBX,NETMBX
Default Device: New: SYS$SPECIFIC:
Original: SYS$SYSDEVICE:
Dialup access: New: Primary: (no access), Secondary: (no access)
Original: Primary: (full access), Secondary: (full acc
ess)
Default Directory: New: [MAIL$SERVER]
Original: [USER]
Flags: New: RESTRICTED
Original: DISUSER
LGICMD: New: NL:
Original: LOGIN
Local access: New:
*TRUNCATED* -- If audits are enabled for this class, the full message
can be examined with ANALYZE/AUD
%UAF-I-RDBADDMSGU, identifier MAIL$SERVER value [000376,000374] added to rights
database
%%%%%%%%%%% dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%%
Message from user AUDIT$SERVER on VAX
Security alarm (SECURITY) and security audit (SECURITY) on VAX, system id: 1025
Auditable event: Identifier added
Event time: dd-mmm-yyyy hh:mm:ss.cc
PID: 00000210
Process name: SYSTEM
Username: SYSTEM
Process owner: [SYSTEM]
Terminal name: OPA0:
Image name: VAX$DUA0:[SYS0.SYSCOMMON.][SYSEXE]AUTHORIZE.EXE
Identifier name: MAIL$SERVER
Identifier value: %X00FE00FC
Attributes: none
%%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%%
Message from user AUDIT$SERVER on VAX
Security alarm (SECURITY) and security audit (SECURITY) on VAX, system id: 1025
Auditable event: Identifier added
Event time: dd-mmm-yyyy hh:mm:ss.cc
PID: 00000210
Process name: SYSTEM
Username: SYSTEM
Process owner: [SYSTEM]
Terminal name: OPA0:
Image name: VAX$DUA0:[SYS0.SYSCOMMON.][SYSEXE]AUTHORIZE.EXE
Identifier name: DECNET
Identifier value: %X00FEFFFF
Attributes: none
%UAF-I-RDBADDMSGU, identifier DECNET value [000376,177777] added to rights datab
ase
%%%%%%%%%%% dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%%
Message from user AUDIT$SERVER on VAX
Security alarm (SECURITY) and security audit (SECURITY) on VAX, system id: 1025
Auditable event: System UAF record modification
Event time: dd-mmm-yyyy hh:mm:ss.cc
PID: 00000210
Process name: SYSTEM
Username: SYSTEM
Process owner: [SYSTEM]
Terminal name: OPA0:
Image name: VAX$DUA0:[SYS0.SYSCOMMON.][SYSEXE]AUTHORIZE.EXE
Object class name: FILE
Object name: SYS$COMMON:[SYSEXE]SYSUAF.DAT;1
User record: MAIL$SERVER
Password Date: New: (pre-expired)
Original: (pre-expired)
%UAF-I-MDFYMSG, user record(s) updated
%UAF-I-DONEMSG, system authorization file modified
%UAF-I-RDBDONEMSG, rights database modified
%UAF-I-ADDMSG, user record successfully added
%%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%%
Message from user AUDIT$SERVER on VAX
Security alarm (SECURITY) and security audit (SECURITY) on VAX, system id: 1025
Auditable event: System UAF record addition
Event time: dd-mmm-yyyy hh:mm:ss.cc
PID: 00000210
Process name: SYSTEM
Username: SYSTEM
Process owner: [SYSTEM]
Terminal name: OPA0:
Image name: VAX$DUA0:[SYS0.SYSCOMMON.][SYSEXE]AUTHORIZE.EXE
Object class name: FILE
Object name: SYS$COMMON:[SYSEXE]SYSUAF.DAT;1
User record: PHONE$SERVER
Account: New: DECNET
Original:
Batch access: New: Primary: (no access), Secondary: (no access)
Original: Primary: (full access), Secondary: (full acc
ess)
Default privileges: New: TMPMBX,NETMBX
Original: TMPMBX,NETMBX
Default Device: New: SYS$SPECIFIC:
Original: SYS$SYSDEVICE:
Dialup access: New: Primary: (no access), Secondary: (no access)
Original: Primary: (full access), Secondary: (full acc
ess)
Default Directory: New: [PHONE$SERVER]
Original: [USER]
Flags: New: RESTRICTED
Original: DISUSER
LGICMD: New: NL:
Original: LOGIN
Local access: New:
*TRUNCATED* -- If audits are enabled for this class, the full message
can be examined with ANALYZE/AUD
%UAF-I-RDBADDMSGU, identifier PHONE$SERVER value [000376,000372] added to rights
database
%%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%%
Message from user AUDIT$SERVER on VAX
Security alarm (SECURITY) and security audit (SECURITY) on VAX, system id: 1025
Auditable event: Identifier added
Event time: dd-mmm-yyyy hh:mm:ss.cc
PID: 00000210
Process name: SYSTEM
Username: SYSTEM
Process owner: [SYSTEM]
Terminal name: OPA0:
Image name: VAX$DUA0:[SYS0.SYSCOMMON.][SYSEXE]AUTHORIZE.EXE
Identifier name: PHONE$SERVER
Identifier value: %X00FE00FA
Attributes: none
%%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%%
Message from user AUDIT$SERVER on VAX
Security alarm (SECURITY) and security audit (SECURITY) on VAX, system id: 1025
Auditable event: System UAF record modification
Event time: dd-mmm-yyyy hh:mm:ss.cc
PID: 00000210
Process name: SYSTEM
Username: SYSTEM
Process owner: [SYSTEM]
Terminal name: OPA0:
Image name: VAX$DUA0:[SYS0.SYSCOMMON.][SYSEXE]AUTHORIZE.EXE
Object class name: FILE
Object name: SYS$COMMON:[SYSEXE]SYSUAF.DAT;1
User record: PHONE$SERVER
Password Date: New: (pre-expired)
Original: (pre-expired)
%UAF-I-MDFYMSG, user record(s) updated
%UAF-I-DONEMSG, system authorization file modified
%UAF-I-RDBDONEMSG, rights database modified
%UAF-I-ADDMSG, user record successfully added
%%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%%
Message from user AUDIT$SERVER on VAX
Security alarm (SECURITY) and security audit (SECURITY) on VAX, system id: 1025
Auditable event: System UAF record addition
Event time: dd-mmm-yyyy hh:mm:ss.cc
PID: 00000210
Process name: SYSTEM
Username: SYSTEM
Process owner: [SYSTEM]
Terminal name: OPA0:
Image name: VAX$DUA0:[SYS0.SYSCOMMON.][SYSEXE]AUTHORIZE.EXE
Object class name: FILE
Object name: SYS$COMMON:[SYSEXE]SYSUAF.DAT;1
User record: NML$SERVER
Account: New: DECNET
Original:
Batch access: New: Primary: (no access), Secondary: (no access)
Original: Primary: (full access), Secondary: (full acc
ess)
Default privileges: New: TMPMBX,NETMBX
Original: TMPMBX,NETMBX
Default Device: New: SYS$SPECIFIC:
Original: SYS$SYSDEVICE:
Dialup access: New: Primary: (no access), Secondary: (no access)
Original: Primary: (full access), Secondary: (full acc
ess)
Default Directory: New: [NML$SERVER]
Original: [USER]
Flags: New: RESTRICTED
Original: DISUSER
LGICMD: New: NL:
Original: LOGIN
Local access: New:
*TRUNCATED* -- If audits are enabled for this class, the full message
can be examined with ANALYZE/AUD
%UAF-I-RDBADDMSGU, identifier NML$SERVER value [000376,000371] added to rights d
atabase
%%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%%
Message from user AUDIT$SERVER on VAX
Security alarm (SECURITY) and security audit (SECURITY) on VAX, system id: 1025
Auditable event: Identifier added
Event time: dd-mmm-yyyy hh:mm:ss.cc
PID: 00000210
Process name: SYSTEM
Username: SYSTEM
Process owner: [SYSTEM]
Terminal name: OPA0:
Image name: VAX$DUA0:[SYS0.SYSCOMMON.][SYSEXE]AUTHORIZE.EXE
Identifier name: NML$SERVER
Identifier value: %X00FE00F9
Attributes: none
%%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%%
Message from user AUDIT$SERVER on VAX
Security alarm (SECURITY) and security audit (SECURITY) on VAX, system id: 1025
Auditable event: System UAF record modification
Event time: dd-mmm-yyyy hh:mm:ss.cc
PID: 00000210
Process name: SYSTEM
Username: SYSTEM
Process owner: [SYSTEM]
Terminal name: OPA0:
Image name: VAX$DUA0:[SYS0.SYSCOMMON.][SYSEXE]AUTHORIZE.EXE
Object class name: FILE
Object name: SYS$COMMON:[SYSEXE]SYSUAF.DAT;1
User record: NML$SERVER
Password Date: New: (pre-expired)
Original: (pre-expired)
%UAF-I-MDFYMSG, user record(s) updated
%UAF-I-DONEMSG, system authorization file modified
%UAF-I-RDBDONEMSG, rights database modified
%UAF-I-ADDMSG, user record successfully added
%%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%%
Message from user AUDIT$SERVER on VAX
Security alarm (SECURITY) and security audit (SECURITY) on VAX, system id: 1025
Auditable event: System UAF record addition
Event time: dd-mmm-yyyy hh:mm:ss.cc
PID: 00000210
Process name: SYSTEM
Username: SYSTEM
Process owner: [SYSTEM]
Terminal name: OPA0:
Image name: VAX$DUA0:[SYS0.SYSCOMMON.][SYSEXE]AUTHORIZE.EXE
Object class name: FILE
Object name: SYS$COMMON:[SYSEXE]SYSUAF.DAT;1
User record: MIRRO$SERVER
Account: New: DECNET
Original:
Batch access: New: Primary: (no access), Secondary: (no access)
Original: Primary: (full access), Secondary: (full acc
ess)
Default privileges: New: TMPMBX,NETMBX
Original: TMPMBX,NETMBX
Default Device: New: SYS$SPECIFIC:
Original: SYS$SYSDEVICE:
Dialup access: New: Primary: (no access), Secondary: (no access)
Original: Primary: (full access), Secondary: (full acc
ess)
Default Directory: New: [MIRRO$SERVER]
Original: [USER]
Flags: New: RESTRICTED
Original: DISUSER
LGICMD: New: NL:
Original: LOGIN
Local access: New:
*TRUNCATED* -- If audits are enabled for this class, the full message
can be examined with ANALYZE/AUD
%UAF-I-RDBADDMSGU, identifier MIRRO$SERVER value [000376,000367] added to rights
database
%%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%%
Message from user AUDIT$SERVER on VAX
Security alarm (SECURITY) and security audit (SECURITY) on VAX, system id: 1025
Auditable event: Identifier added
Event time: dd-mmm-yyyy hh:mm:ss.cc
PID: 00000210
Process name: SYSTEM
Username: SYSTEM
Process owner: [SYSTEM]
Terminal name: OPA0:
Image name: VAX$DUA0:[SYS0.SYSCOMMON.][SYSEXE]AUTHORIZE.EXE
Identifier name: MIRRO$SERVER
Identifier value: %X00FE00F7
Attributes: none
%%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%%
Message from user AUDIT$SERVER on VAX
Security alarm (SECURITY) and security audit (SECURITY) on VAX, system id: 1025
Auditable event: System UAF record modification
Event time: dd-mmm-yyyy hh:mm:ss.cc
PID: 00000210
Process name: SYSTEM
Username: SYSTEM
Process owner: [SYSTEM]
Terminal name: OPA0:
Image name: VAX$DUA0:[SYS0.SYSCOMMON.][SYSEXE]AUTHORIZE.EXE
Object class name: FILE
Object name: SYS$COMMON:[SYSEXE]SYSUAF.DAT;1
User record: MIRRO$SERVER
Password Date: New: (pre-expired)
Original: (pre-expired)
%UAF-I-MDFYMSG, user record(s) updated
%UAF-I-DONEMSG, system authorization file modified
%UAF-I-RDBDONEMSG, rights database modified
%UAF-I-ADDMSG, user record successfully added
%%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%%
Message from user AUDIT$SERVER on VAX
Security alarm (SECURITY) and security audit (SECURITY) on VAX, system id: 1025
Auditable event: System UAF record addition
Event time: dd-mmm-yyyy hh:mm:ss.cc
PID: 00000210
Process name: SYSTEM
Username: SYSTEM
Process owner: [SYSTEM]
Terminal name: OPA0:
Image name: VAX$DUA0:[SYS0.SYSCOMMON.][SYSEXE]AUTHORIZE.EXE
Object class name: FILE
Object name: SYS$COMMON:[SYSEXE]SYSUAF.DAT;1
User record: VPM$SERVER
Account: New: DECNET
Original:
Batch access: New: Primary: (no access), Secondary: (no access)
Original: Primary: (full access), Secondary: (full acc
ess)
Default privileges: New: TMPMBX,NETMBX
Original: TMPMBX,NETMBX
Default Device: New: SYS$SPECIFIC:
Original: SYS$SYSDEVICE:
Dialup access: New: Primary: (no access), Secondary: (no access)
Original: Primary: (full access), Secondary: (full acc
ess)
Default Directory: New: [VPM$SERVER]
Original: [USER]
Flags: New: RESTRICTED
Original: DISUSER
LGICMD: New: NL:
Original: LOGIN
Local access: New:
*TRUNCATED* -- If audits are enabled for this class, the full message
can be examined with ANALYZE/AUD
%UAF-I-RDBADDMSGU, identifier VPM$SERVER value [000376,000370] added to rights d
atabase
%%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%%
Message from user AUDIT$SERVER on VAX
Security alarm (SECURITY) and security audit (SECURITY) on VAX, system id: 1025
Auditable event: Identifier added
Event time: dd-mmm-yyyy hh:mm:ss.cc
PID: 00000210
Process name: SYSTEM
Username: SYSTEM
Process owner: [SYSTEM]
Terminal name: OPA0:
Image name: VAX$DUA0:[SYS0.SYSCOMMON.][SYSEXE]AUTHORIZE.EXE
Identifier name: VPM$SERVER
Identifier value: %X00FE00F8
Attributes: none
%%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%%
Message from user AUDIT$SERVER on VAX
Security alarm (SECURITY) and security audit (SECURITY) on VAX, system id: 1025
Auditable event: System UAF record modification
Event time: dd-mmm-yyyy hh:mm:ss.cc
PID: 00000210
Process name: SYSTEM
Username: SYSTEM
Process owner: [SYSTEM]
Terminal name: OPA0:
Image name: VAX$DUA0:[SYS0.SYSCOMMON.][SYSEXE]AUTHORIZE.EXE
Object class name: FILE
Object name: SYS$COMMON:[SYSEXE]SYSUAF.DAT;1
User record: VPM$SERVER
Password Date: New: (pre-expired)
Original: (pre-expired)
%UAF-I-MDFYMSG, user record(s) updated
%UAF-I-DONEMSG, system authorization file modified
%UAF-I-RDBDONEMSG, rights database modified
%NCP-I-SUCCESS, Success
Logging sink type = monitor
%NML-I-RECADDED, Database entry added
The changes have been made.
If you have not already registered the DECnet-VAX key, then do so now.
After the key has been registered, you should invoke the procedure
SYS$MANAGER:STARTNET.COM to startup DECnet-VAX with these changes.
(If the key is already registered) Do you want DECnet started? [YES]: (Pulsar ENTER)
%%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%%
Message from user DECNET on VAX
DECnet starting
%RUN-S-PROC_ID, identification of created process is 00000211
%%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%%
Message from user DECNET on VAX
Error opening permanent proxy database
%NCP-I-NOINFO, No information in database
%RUN-S-PROC_ID, identification of created process is 00000213
$
%%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%%
Message from user DECNET on VAX
DECnet event 4.10, circuit up
From node 56.1 (VAX), dd-mmm-yyyy hh:mm:ss.cc
Circuit QNA-0
$ _
Se edita SYSTARTUP_VMS para que DECNet arranque automaticamente al inicio
$ set term/vt100 $ edit sys$manager:systartup_vms.com
Se pulsa [AvPág] hasta el final, y se añada la línea en rojo
$! $! To start the OpenVMS Management Station server application, remove the $! the comment delimiter ($!) from the command line below. $! $!$ @SYS$STARTUP:TNT$STARTUP $! $! $! Remove the comment delimiter ($!) from the following line to have $! Monitor run with TCP/IP. $! $!$ @SYS$STARTUP:VPM$STARTUP.COM $! $! $! Remove the comment delimiter ($!) from the following line to start $! RPC services. $! $!$ @SYS$STARTUP:DCE$RPC_STARTUP.COM $! $ MOUNT/SYSTEM DUA1 DATA1 $ @SYS$MANAGER:STARTNET $ EXIT Buffer: SYSTARTUP_VMS.COM | Write | Insert | Forward 409 lines read from file SYS$COMMON:[SYSMGR]SYSTARTUP_VMS.COM;2
Se pulsa [Ctrl+Z] para salir y guardar. Ahora, DECnet arrancará automáticamente siempre que se inicie el sistema.
Por último se añaden las direcciones del resto de los equipos que componen la red (las indicadas aquí son a modo de ejemplo):
$ run sys$system:ncp NCP>define node 56.2 name pdp11 NCP>define node 56.3 name linux NCP>exit $ _
Se inicia el sistema para que los cambios tengan efecto
$ @sys$system:shutdown SHUTDOWN -- Perform an Orderly System Shutdown on node VAX How many minutes until final shutdown [0]: (Pulsar ENTER) Reason for shutdown [Standalone]: (Pulsar ENTER) Do you want to spin down the disk volumes [NO]? (Pulsar ENTER) Do you want to invoke the site-specific shutdown procedure [YES]? (Pulsar ENTER) Should an automatic system reboot be performed [NO]? (Pulsar ENTER) When will the system be rebooted [later]: (Pulsar ENTER) Shutdown options (enter as a comma-separated list): REBOOT_CHECK Check existence of basic system files SAVE_FEEDBACK Save AUTOGEN feedback information from this boot DISABLE_AUTOSTART Disable autostart queues Shutdown options [NONE]: (Pulsar ENTER) %SHUTDOWN-I-OPERATOR, this terminal is now an operator's console %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Operator status for operator _VAX$OPA0: CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY, LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10, OPER11, OPER12 %SHUTDOWN-I-DISLOGINS, interactive logins will now be disabled %SET-I-INTSET, login interactive limit = 0, current interactive value = 1 %SHUTDOWN-I-STOPQUEUES, the queues on this node will now be stopped %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Message from user JOB_CONTROL on VAX %JBC-E-OPENERR, error opening SYS$COMMON:[SYSEXE]QMAN$MASTER.DAT; %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Message from user JOB_CONTROL on VAX -RMS-E-FNF, file not found SHUTDOWN message on VAX from user SYSTEM at _VAX$OPA0: 13:34:48 VAX will shut down in 0 minutes; back up later. Please log off node VAX. Standalone 1 terminal has been notified on VAX. %SHUTDOWN-I-SITESHUT, the site-specific shutdown procedure will now be invoked %SHUTDOWN-I-STOPUSER, all user processes will now be stopped %SHUTDOWN-I-STOPAUDIT, the security auditing subsystem will now be shut down %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Message from user AUDIT$SERVER on VAX Security alarm (SECURITY) and security audit (SECURITY) on VAX, system id: 1025 Auditable event: Audit server shutting down Event time: dd-mmm-yyyy hh:mm:ss.cc PID: 00000210 Username: SYSTEM %SHUTDOWN-I-STOPSECSRV, the security server will now be shut down %SHUTDOWN-I-REMOVE, all installed images will now be removed %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Message from user SYSTEM on VAX %SECSRV-I-CIASHUTDOWN, breakin detection and evasion processing is shutting down %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Message from user SYSTEM on VAX %SECSRV-I-PROXYSHUTDOWN, proxy processing is shutting down %SHUTDOWN-I-DISMOUNT, all volumes will now be dismounted %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Message from user SYSTEM on VAX %SECSRV-I-SERVERSHUTDOWN, security server shutting down %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Message from user SYSTEM on VAX _VAX$OPA0:, VAX shutdown was requested by the operator. %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Logfile was closed by operator _VAX$OPA0: Logfile was VAX::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;3 %%%%%%%%%%% OPCOM dd-mmm-yyyy hh:mm:ss.cc %%%%%%%%%%% Operator _VAX$OPA0: has been disabled, username SYSTEM SYSTEM SHUTDOWN COMPLETE - use console to halt system Infinite loop, PC: 833C2CD3 (BRB 833C2CD3) sim> quit Goodbye NVR: writing buffer to file Eth: closed eth0 root@VAX:~/MVS73 # _
Y ya está la red instlada y configurada.
Se puede comprobar si la dirección por defecto del sistema es correcta con el comando siguiente:
$ show network
Product: DECNET Node: VAX Address(es): 56.1
Si la dirección no es correcta, hay que modificar el SYSTEMID con el procedimiento siguiente:
$ run sys$system:sysgen SYSGEN> SET SCSSYSTEMID 11266 SYSGEN> WRITE CURRENT SYSGEN> EXIT
Y en el próximo arranque la dirección será correcta.
La lista de nodos se obtiene con
$ run sys$system:ncp NCP>show known nodes Known Node Volatile Summary as of dd-mmm-yyyy hh:mm:ss Executor node = 56.1 (VAX) State = on Identification = DECnet for OpenVMS VAX V7.3 Node State Active Delay Circuit Next node Links 56.2 (PDP11) QNA-0 0 56.3 (LINUX) QNA-0 0 NCP>exit $ _
Ahora es el momento de realizar la copia de los discos, y se puede continuar con la instalación de TCP/IP.
©2017-2024, jCæsar
Contacto
Contacto